To optimise the side view Mattig has ABS running board in 6 different designs for 229. -- € per set as well as sports mirrors in 5 versions from 119. -- €. As a counterpart to the impressive fibreglass front apron a matching rear apron can be fitted, which is available with and without a cutout for the license plate. If the license plate is mounted lower down, the cutout can be neatly cleaned with the new Mattig cover for 49,90 €. This is installed with an electric trunk release, and hey presto! the lock has vanished. The appearance of the rear can be made a whole lot more exciting with rear spoilers in race look for 349.-- € as well as with the matching rear window spoiler for 179.-- €. Last but not least the trendy ABS taillight covers for 59,90 € or in carbon look for 79,90 € per set. If you think the stock headlights, turn signal indicators and taillights are too boring, you can replace them with clear or black design lights, of which Mattig has many different designs. For drivers who like to travel incognito there are the Mattig adhesive emblems in 50 mm and 75 mm diameters for 14,90 €. These are made out of flexible plastic and can be stuck on simply by pulling off the protective adhesive film on the back. To achieve a lowering of c. 35 mm, Mattig has a set of springs from 125.-- € or a Bilstein coilover adjustable suspension from 902.-- € in its line-up. The necessary sound comes from an exhaust system from the catalytic converter onward with 80 mm tailpipes on the left and right for 779.-- €. ATS wheel rims 8.5x18 with 225/40 R18 tires ensure proper contact with the road. Mattig has aluminium foot mats for the footwell, laser cut out of high quality aluminium and with absolutely clean and burr-free edges. To prevent any slipping in the footwell the greatest attention was paid to achieving an absolutely snug fit. Various sports steering wheels remain available for the Vectra B, with and without airbags, various shifter knobs, handbrake levers, leather shifter sleeves as well as shift gates. |